Drinking bowl. Heavy gauge steel, galvanised after manufacture. Finished with no sharp
edges or corners to protect your animals. Strong and durable valve assembly, best used via a header tank. Fitted with Zytel valve.
Height
140mm
Width
250mm
Depth
250mm
Capacity
2.5 litres
A103
A drinker suitable for all livestock. Heavy gauge steel, galvanised after manufacture.
Finished with no sharp edges or corners to protect your animals. Fitted with BS1212/PT2 Mains Pressure Ball Valve as standard.
Drain hole and rubber bung are included to assist cleaning.
Height
200mm
Width
305mm
Depth
370mm
Capacity
9 litres
A104
Drinker most suited to sheep. Heavy gauge steel, galvanised after manufacture.
Finished with no sharp edges or corners to protect your animals. Fitted with BS1212/PT2 Mains Pressure Ball Valve as standard.
Height
200mm
Width
430mm
Depth
285mm
Capacity
11.5 litres
A105
Drinker suitable for all livestock. Our best selling mains pressure trough. Heavy gauge steel,
galvanised after manufacture. Finished with no sharp edges or corners to protect your animals. Fitted with BS1212/PT2 Mains Pressure Ball Valve as standard.
Height
200mm
Width
430mm
Depth
370mm
Capacity
14 litres
A116
Double drinker, can be used to supply two pens. Heavy gauge steel, galvanised after manufacture. Finished with no sharp edges or corners to protect your animals. Strong and durable valve assembly, best used via a header tank. Fitted with Zytel valve.
Height
195mm
Width
260mm
Depth
480mm
Capacity
5 litres
P1200
Hook over feed manger suitable for all livestock.
Strongly made in green polypropylene. Finished with no sharp edges or corners to protect your animals.
Height
230mm
Width
1210mm
Depth
350mm
Capacity
50 litres
P1000
Hook over feed manger suitable for all livestock. Strongly made in brown polypropylene.
Finished with no sharp edges or corners to protect your animals.
Height
410/255mm
Width
1235mm
Depth
350mm
Capacity
50 litres
SUEVIA Drinking Bowl Model 20
Bowl made of cast iron, completely enamelled
Brass tube valve with 1/2" BSP connection from above
For high and low pressure
Water regulation by enlarging the nozzle bore
For fixation on tubes of 1 1/2" or 2"
SUEVIA Drinking Bowl Model 61
Drinking bowl equipped with latest TUBE-Valve technology!
Bowl in cast iron and complete enamel finish
Water connection from the top or bottom by 1/2" BSP: suited for low and high water conditions
Smoothly operating tube valve (no tongue) Guarantee for a long maintenance-free life!
Calm water flow, no water wastage
Four-hole-fixation
SUEVIA Drinking Bowl Model 10P
High quality AQUATHAN plastic bowl
Brass tube valve with 1/2" BSP connection from above
