C.A. GALVIN LTD













The Medium Kranzle Quadros

Kranzle 599 TS T - Kranzle 799 TS T
 
 
Standard Equipment:
  • Integrated trolley
  • 5 m power lead (799 TS T: 7.5 m)
  • Cable reel
  • 20 m steel-weave high-pressure hose
  • Hose drum
  • Spray gun with safety cut-out
  • Total-Stop facility with delayed motor cut-out
  • Safety cut-out
  • Dirtkiller lance
  • Spray lance with stainless steel pipe
  • Continuously adjustable pressure control
  • Brass pump head
  • Dry-run safety
  • Ceramic-coated pump plungers
  • Receptacle for spray gun, lance and Dirtkiller
  • Detergent injector with filter



With integrated hose drum:

The fixed hose drum puts order into the system. Never again entangled or carelessly layed down high-pressure hoses, that have to be detected or disentangled before starting work.
And moreover - the durability of the hoses is substantially extended!


With delayed motor cut-out:


Frequent switching on and off of the motor on medium sized and big Quadros can overload the power circuit and wear out the internal electrical components. For this reason the pump continues to work for 30 seconds in pressureless by-pass operation after having closed the gun. After that period the motor of the new Kränzle cleaners switches off. The motor is restarted when the gun is opened again.


With water tank:


The big water tank on all Quadro models is used as a water resevoir and buffer between water supply and pump.


With detergent supply at the suction side:

Detergent injectors at the pressure side, as used for standard machines, consume approx. 30 % of the energy, no matter if they are in operation or not. Due to the water tank it is now possible to suck detergents directly into the pump, preventing a decrease in the output and thus leading to an increase of the efficiency. The detergents can be sprayed without reducing the operating pressure.

 

Technical data: Kränzle 599 T ST - 799 T ST        

     
  Kränzle 599 TS T Kränzle 799 TS T
Operating pressure, continuously adjustable 10 - 150 bar 10 - 180 bar
Max. admissible overpressure 165 bar 200 bar
Water output at nominal pressure 10 l/min 13.5 l/min
Nozzle size (flat jet) 25035 25045
Nozzle size Dirtkiller 035 045
Content water tank 10 l 10 l
Detergent suction prior to pump yes yes
Max. inlet water temperature into water tank 70° 70°
Max. temperature for direct suction *1) 60° 60°
Suction height for direct suction 2.5 m 2.5 m
Hose drum yes yes
Dirtkiller yes yes
Delayed motor cut-out yes yes
Total-Stop yes yes
Steel weave high-pressure hose, NW 6 20 m 20 m
Connected load 230 V~ 14 A, 50 Hz 400 V threephase
8.5 A, 50 Hz
Motor speed 1.400 r.p.m. 1.400 r.p.m.
Power input: P 1 - 3.2 kW P 1 - 5.5 kW
Power output: P 2 - 2.3 kW P 2 - 4.0 kW
Weight incl. accessories (empty water tank) 60 kg 60 kg
Dimensions incl. handle, L x W x H in mm 780 x 395 x 870 780 x 395 x 870
Order No. 40 431 40 432
*1 Direct suction is possible through by-pass of water tank!



_________________________________________________________________________________________________
Copyright 2005 - C.A. Galvin Ltd - All Rights Reserved